Looking for a custom server? Email your desired specification to opsec@cygint.com.
Limited quantity**
| Processor | Cores | Ram | Storage | Transfer | IPV4 | Monthly | |
|---|---|---|---|---|---|---|---|
| Intel Xeon E3-1230 v2 | 3.3 GHz 4c/8t | 16 GB DDR3 | 1× 120 GB (SSD SATA) | 1 Gbps 50 TB | 1 | $87.65 | Order |
| Intel Xeon E3-1246 v3 | 3 GHz 4c/8t | 16 GB DDR3 | 1× 2 TB (HDD SATA) | 1 Gbps 50 TB | 1 | $99.31 | Order |
| Intel Xeon E3-1270 v2 | 3.5 GHz 4c/8t | 32 GB DDR3 | 1× 1 TB (SSD SATA) | 1 Gbps 50 TB | 1 | $108.07 | Order |
| Intel Xeon E-2336 | 2.9 GHz 6c/12t | 32 GB DDR4 | 2× 1 TB (HDD SATA) | 1 Gbps 50 TB | 1 | $145.91 | Order |
| Intel Xeon E3-1230 v6 | 3.5 GHz 4c/8t | 32 GB DDR4 | 2× 500 GB (SSD NVMe) | 1 Gbps 50 TB | 1 | $160.48 | Order |
| Intel Xeon E-2236 | 3.4 GHz 6c/12t | 32 GB DDR4 / 64 GB DDR4 |
2× 500 GB (SSD NVMe) | 1 Gbps 50 TB | 1 | $160.48 | Order |
All of our servers are protected against DDoS attacks ranging from 20 Gbit/s to 100 Gbit/s.
Our speeds are guaranteed and full-duplex. For unlimited traffic, opt for unmetered.
Set rDNS (reverse DNS) for all your IPs to enhance the sender's reputation, which can improve email deliverability.
You can request a /27 Subnet (29 usable IPs) per server IPV4 allocation may be subject to special conditions.
IPMI is used for managing and monitoring servers. enabling administrators to perform remote tasks even if the OS is down or the server is powered off.
This feature includes a hardware RAID controller, enabling independent RAID management from the host. It presents a single disk per RAID array to the host.
This feature allows servers to connect via the local network. A minimum of two servers is required. You can request it by submitting a ticket
You can use IPv6 as your primary or secondary/failover IP. Additional IPv6 addresses are available upon request at no additional cost.